Barco R9002380 Installation Manual - page 30
Installation Adjustments
6-6
5976067 BARCOCINE 7 151299
forbidden area
projected raster
crt faceplate border
phosphor border
correct raster position
wrong raster position
RASTER CENTERING
CONTRAST LEVEL IS REDUCED
AND BRIGHTNESS INCREASED
TO MAKE THE RASTER
VISIBLE ON THE FACE PLATE
OF EACH CRT.
USE THE ARROW KEYS
TO CENTER THE RASTER
ON THE GREEN, RED AND
BLUE CRT RESPECTIVELY
How to adjust ?
Press ENTER to display the raster on the green CRT.
Look into the green lens and shift the raster with the control disc until it is centered in the middle of the CRT faceplate.
Press ENTER to activate the raster on the Red CRT faceplate.
Shift the raster with the control disc until the raster is centered in the middle of the CRT faceplate.
Press ENTER to activate the raster on the Blue CRT faceplate.
Shift the blue raster with the control disc until the raster is centered on the CRT faceplate.
Press ENTER to continue with the CRT projection angle adjustment