Barco R9002380 Installation Manual - page 33
Installation Adjustments
7-9
5976067 BARCOCINE 7 151299
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
é
or
ê
then
When finishing the installation mode
After finishing the installation adjustments procedure, the
'Path selection' returns on the screen. You are now able to start the alignment
procedure for the projector. You have the choice between:
- Guided Adjustment Procedure
- Random Access Adjustment Procedure
The result of both procedures will be the same. More explanation about both procedures is given in the owners manual.
The following paragraph gives an overview of the image corrections.
Alignment of the projector.
Overview of the corrections
For detailed information about these corrections and procedures to be followed, see owner's manual. (pages given hereafter are
for the random access adjustment mode)
Shift corrections for the Red, Green and Blue image.
Left-Right adjustments
- Vertical center line bow and skew
- Left and right keystone adjustment
- Left and right bow adjustment
- Horizontal size adjustment
Top-Bottom adjustments
- Horizontal centerline bow and skew
- Top keystone adjustment
- Top bow adjustment
- Bottom keystone adjustment
- Bottom bow adjustment
Size-linearity adjustments
- Horizontal size adjustment
- Vertical linearity adjustment
- Vertical size adjustment
- Horizontal phase adjustment
Convergence adjustments
- Green only
- Red on green
- Blue on green
Blanking adjustment
- Top-Bottom, Left-Right
Color adjustments