Bauhn HE215041 Instruction Manual - Installation
10
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
Installation
2.3 To Control Your Power Point Controller Manually
The Bauhn Indoor Power Point Controllers can be switched on or off manually without using the
remote control.
1. Press the power button marked ON / OFF located on the front of the Power Point Controller to
toggle power ON or OFF.
NOTE: The Power Point Controller LED will be lit when ON.
2.4 Resetting a Power Point Controller
There are two methods to un-pair or reset the Power Point Controllers.
To un-pair individual controllers:
1. Press and hold the ON/OFF button located on the front of the Power Point Controller.
When the LED begins to flash the Power Point unit has been reset.
OR
To un-pair all controllers:
1. Press and hold the ALL OFF button on the remote control for 5 seconds.
2. When the LED begins to flash the Power Point unit has been reset.