Bauhn HE215041 Instruction Manual - Installation
13
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
Installation
4.2 Home Screen & Menu
As shown above, the ‘e-control’ home screen consists of scenes and remotes. Swipe towards the
right to access the menu, or towards the left to show the ‘Device list’. The ‘+’ button on the top right
corner allows you to add additional remotes, scenes and devices.
4.3 Adding a Remote Control
Infrared (IR) and Radio Frequency (RF) remotes can be programmed into the IR / RF Wi-Fi
Controller. As IR uses light, ensure that the controller is within visual range of the device it is
controlling (such as in a lounge room with TV, Air Conditioner, DVD Player and Set Top Box). As RF
uses radio frequency, ensure that the controller is within 30m of the device is it controlling (such as
Indoor Remote Control Power Points or Garage Door).
Note: Radio Frequency has a range of up to 30m line of sight. The range can be affected by
environmental factors such as walls and other electronic devices.
1. Tap the ‘+’ on the top right corner of the ‘e-control’ app home screen and select ‘Add Remote’.
2. Select the remote control configuration that best matches your remote, for example ‘TV’. If
there is no similar device remote, for example the Remote Controlled Power Points, you can
also create a ‘User-Defined’ remote. To add a ‘User-Defined’ remote, follow the steps in ‘4.4 User-
Defined Remotes’.
3. A remote control configuration will now be shown. Using the ‘e-control’ app, press a button on
the remote.
4. When prompted with a learning popup, press the corresponding button on the devices
original remote (ie/ Your television remote).