Caiman Lektrafuse Instructions For Use Manual - page 5
3
Contents
1.
Safe handling
3
1.1
Safe for use in conformance with IEC regulations
4
2.
Product description
5
2.1
Scope of supply
5
2.2
Components required for operation
5
2.3
Intended use
5
2.4
Operating principle
5
2.5
Acoustic warning signal
6
2.6
Monitoring functions
6
2.7
Output power diagrams
7
2.8
Maximum peak output voltage (Up)
7
3.
Preparation and setup
7
3.1
First use
7
4.
Working with the Lektrafuse HF generator GN200
8
4.1
System set-up
8
4.2
Function checks
10
4.3
Safe operation
10
5.
Validated reprocessing procedure
11
5.1
General safety instructions
11
5.2
General information
11
5.3
Preparations at the place of use
11
5.4
Preparation before cleaning
11
5.5
Cleaning/disinfection
12
5.6
Wipe disinfection for electrical devices without sterilization
13
5.7
Inspection, maintenance and checks
13
5.8
Storage and transport
13
6.
Maintenance
13
6.1
Safety inspection
13
7.
Troubleshooting list
15
7.1
Regrasp error
15
7.2
Warnings
16
7.3
Error reports
16
7.4
Failure messages
17
7.5
Problem solving
17
7.6
User maintenance
18
7.7
Fuse replacement
18
8.
Technical Service
18
9.
Accessories/Spare parts
18
10.
Technical data
18
10.1 Ambient conditions
19
11.
Disposal
19
12.
Distributor in the US/Contact in Canada for product
information and complaints
19
1.
Safe handling
CAUTION
Federal law restricts this device to sale by or on order of a physician!
Note
These instructions for use only describe the set-up, function and operation
of the Lektrafuse generator GN200 and is not suitable for initiating a
beginner in high-frequency surgery.
Ŷ
General risk factors associated with surgical procedures are not
described in this documentation.
Ŷ
It is the operating surgeon's responsibility to ensure that the surgical
procedure is performed correctly.
Ŷ
The operating surgeon must have a thorough understanding of both
the hands-on and conceptual aspects of the established operating
techniques.
Ź
Transport the product only in its original box.
Ź
Prior to use, check that the product is in good working order.
Ź
Observe “Notes on Electromagnetic Compatibility (EMC)“, see
TA022130.
Ź
The Lektrafuse HF generator GN200 fulfills the requirements of
CISPR 11, Class A.
Ź
To prevent damage caused by improper setup or operation, and in order
not to compromise warranty and manufacturer liability:
– Use the product only according to these instructions for use.
– Follow the safety and maintenance instructions.
– Only combine Aesculap products with each other.
– Adhere to application instructions according to relevant norms, see
Safe for use in conformance with IEC regulations.
DANGER
Risk of injury to patients due to inappropriate
application!
Ź
The product and accessories should only be
operated by qualified or trained and experi-
enced personnel.
WARNING
Risk of injury and material damage due to inappro-
priate use of the product!
Ź
Use the product only in accordance with the
intended use.
WARNING
Risk of injury and material damage due to improper
handling of the product!
The Lektrafuse HF generator together with the
accessories forms a system.
Ź
Follow the instructions for use of the Lektrafuse
HF generator accessories.
Ź
Follow the instructions for use of all products
used.