Cajun Injector Electric Smoker Owner's Manual - Assembly Instructions

ASSEMBLY INSTRUCTIONS

Tools needed: Phillips Head Screwdriver

Step 3 – Install Wood Pellet Tray

Slide the wood pellet tray into the corresponding 

•

supports, insuring that the tray is placed to com-

pletely enclose the heating element with the two 

surfaces of the tray.

Step 4 – Drip Pan Placement

Set Drip Pan on the floor of the inside of smoker, 

•

below the wood pellet tray.  The raised edges of 

the pan should be face up in order to catch any 

juices that may drip from meat.  

Be sure that the pan does not obstruct the smok-

•

er door from closing.

Step 5 – Rack Placement

Set metal racks on rack support shafts located 

•

on the sidewalls inside the smoker.  It is not nec-

essary to use all 5 metal racks when smoking; 

racks can be set at various height levels accord-

ing to the size of meats being smoked.  

Note:  The small rack always 

rests on the lowest support shaft  

adjacent to the wood pellet tray.

PELLET TRAY

DRIP PAN

WATER PAN

METAL RACK