CalAmp ITC 220 Installation Manual - page 47
Other manuals for ITC 220:
User manual
Manual is about: Base Station, Locomotive & Wayside
RADIO TRANSCEIVER FOR RAILROAD PTC
of
88
ITC 220 Base Station Transceiver Installation Guide PN 133991 Rev. A
| Page 41
3. On the General tab, click on Internet Protocol (TCP/IP) to select it (you may have to scroll down in the items list to
see it—do not remove the check mark), and then click Properties.
Figure 18 Internet Protocol (TCPIP) Properties Window for Ethernet 1 connection
4. Click Use the following IP address.
5. In the IP address box, enter 192.168.255.200.
6. In the Subnet mask box, enter 255.255.255.0.
7. Click OK.