CalAmp ITC 220 Installation Manual - page 83
ITC 220 Base Station Transceiver Installation Guide PN 133991 Rev. A
| Page 77
12. After the installation finishes, you see the following text in the XtermW console window.
13. Execute the APPS command and then observe the following:
If the Select and Boot check boxes were selected, the downloaded software image will be listed as ACTV (active
image) after the reboot.
If the Select check box was cleared, the downloaded software image will be listed with the status of NRDY.
If the Select check box was selected, the downloaded software image will be listed in the top row of the Apps
table with the highest priority and a status of RDY.
If the Schedule check box was selected, the downloaded software image will be listed with a status of SCHD. The
APPS,SCHED command displays a report of the software update schedule.