Caltech Calaer 2 kW Installation And Operating Instructions Manual - page 11
11
The label referred to in paragraph 0 in the following document, or a
duplicate, must be positioned so that it can be easily read when the heater
is installed in the vehicle. (Requirements from 2001/56/EG Annex VII 2.2.4
and ECE R122 Part I 5.3.2.4)
Every reasonable precaution should be taken in positioning the heater to
minimize the risk of injury and damage to personal property. (Requirements
from 2001/56/EG Annex VII 2.2.5 and ECE R122 Part I 5.3.2.5)
NOTE:
The heater must not be installed in the passenger cabin of class M1 (i.e.
power-driven personal cars having at least four wheels and used for carriage
of passengers) and N vehicles (i.e. power-driven vehicles having at least four
wheels and used for carriage of goods). However, an installation in an
effectively sealed envelope may be used. (Requirements from 2001/56/EG
Annex VII 2 and ECE R122 Part I 5.3)
Figure 2a: Dimensions of the 2 kW Calaer Air heater. All dimensions are in mm unless stated
otherwise.