Caltech Calaer 2 kW Installation And Operating Instructions Manual - page 18
of
36
18
Figure 7: Tank diver installation.
Figure 9: Example of sticker which must be applied near the filler neck.
EXHAUST SYSTE M
The exhaust outlet must be located so as to prevent emissions from entering
the vehicle through ventilators, heated air inlets or opening windows.
(Requirements from 2001/56/EG Annex VII 2.4.1 and ECE R122 Part I
5.3.4.1)
INSTALLATION
The following installation directives have to be followed: