Caltech Calaer 2 kW Installation And Operating Instructions Manual - page 5
5
STATUTORY INSTALLATION REGULATIONS
The 2 kW and 4 kW Calaer air heaters have been type tested and approved
in accordance to the directives ECE R-10 (EMC) and ECE R-122 (Heating) with
the following permit numbers:
Calaer 2 kW Air Heater
•
E11 122R-00 1689
•
10R-05 9041
Calaer 4 kW Air Heater
•
E11 122R-00-1696
•
10R-05 9041
Requirements and installation are governed by the provisions in Annex VII of
the Directive 2001/56/EC, and Part 1 and Annex 7 of the directive ECE R-122.
GENERAL REQUIRE MENTS
Operating and maintenance instructions shall be supplied with every heater
and, in the case of heaters intended for the aftermarket, installation
instruction shall also be supplied. (Requirement from 2001/56/EG Annex VII,
1.1 and ECE R122 Annex 7, 1)
A clearly visible tell-tale in the operator's field of view shall inform when the
combustion heater is switched on or off. (Requirement from 2001/56/EG
Annex VII, 1.7.1 and ECE R122 Annex 7, 7.1)
For installation see chapter 4 of the directives 2001/56/EG Annex VII and
ECE R122 Part 1 and Annex 7.