Cam Sat CAM-9 Operating manual - Table of Contents
Table of contents
Product features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Kit contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Recommendations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Technical data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Switch settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Basic settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Operating the dip-switch
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Video transmission settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Data transmission settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Setting the data transmission operating channel
. . . . . . . . . . . . . . . . . . . . .
9
Advanced settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
Procedure for assigning transmitters to the receiver memory
. . . . . . . . .
11
Setting the video operating channel remotely
. . . . . . . . . . . . . . . . . . . . . . . .
12
Setting the data transmission parameters remotely
. . . . . . . . . . . . . . . . . .
12
Advanced settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
Testing the data link
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
Removing a transmitter from the CAM-9 Rx receiver memory
. . . . . . .
13
Restoring the device to default settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
General warranty terms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
Device disposal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
DECLARATION OF CONFORMITY
I, the undersigned, representing the following company:
CAMSAT Przemysław Gralak
ul. Ogrodowa 2a 86-050 Solec Kujawski
hereby declare, with full responsibility, that the following device:
CAM-9
is approved for operation within the EU and conforms to the fundamental
requirements and other relevant provisions of Directive 1999/5/WE:
Video
Fundamental requirements:
- Article of Directive 1999/5/WE
Applied standards
Assessment
Electromagnetic Compatibility – Art.3.1b
ETSI EN 301 489-1 V1.6.1
ETSI EN 301 489-3 V1.4.1
Conformity
Eff ective use of the frequency resourc-
es – Art.3.2
ETSI EN 300 440-1 V1.4.1
ETSI EN 300 440-2 V1.2.1
Conformity
Frequency range of the transmitter and receiver:
5725 MHz – 5875 MHz
Radiation power of the transmitter:
≤25,0 mW (14 dBm)
Dane
Wymagania zasadnicze:
- artykuł dyrektywy 1999/5/WE
Zastosowane normy
Ocena
Electromagnetic Compatibility – Art.3.1b
EN 301 489-1/-3
Conformity
Eff ective use of the frequency resources
– Art.3.2
EN 300 220-1/-2
Conformity
Safety requirements
- art. 3.1a
EN 60950-1+A11+A1+A12
EN 62311
Conformity
Frequency range of the transmitter and receiver:
869,40 MHz – 869,65 MHz
Transmitter power (measured):
169,8 mW (22,3 dBm)
Notifi ed body participating in the
conformity assessment:
EMCCert dr Rasek GmbH
Stoernhofer Berg 15
91364 Unterleinleiter,
Germany
Notifi ed body number: 0678
Responsible person:
Przemysław Gralak
Position:
właściciel
Signature:
Solec Kujawski 01.07.2014