Cam Sat CAM-9 Operating manual - Technical Data
6
Technical data
DANE
AUDIO-WIDEO
Frequency
869 MHz
5 .8 GHz
Number of operating channels
10
8/16*
Radio link modulation
GFSK
FM
EIRP radiated power
300 mW
25 mW
Receiver sensitivity −118 dBm@1200 bps /
−114 dBm@9600 bps
≤ −85 dBm
Antenna connectors
SMA-RP F 50 Ω
SMA-RP F 50 Ω
Antenna characteristics
omnidirectional
360°H/15°V
Tx: directional –
30°H/30°V
Rx: directional –
20°H/20°V
Antenna gain
2.15 dBi
Tx: 5 dBi; Rx: 19 dBi
Device range 3 km (with the option to extend the range to 5 km)
Video interface BNC 1Vp-p (75 Ω) + screw terminal for UTP (100 Ω)
Video format
PAL/NTSC
Audio interface
Screw terminal, stereo audio in/out 2Vp-p (2 kΩ)
Audio frequency response
50–15000 Hz
Data interface
RS-485 (A+, B−)
Supported protocols Alec, Aritech, Baxal, Bosch Biphase (with additional
converter), COP-1, COP-2, D-Max, Dynacolor, Ganz,
Kalatel, LG, Longcomity, Molynx, Multix, Panasonic,
Pelco D, Pelco P, Samsung, Santachi, Sensormatic,
Ultrak, VCL, Vicon and many other
Data format
8n1, 8o1, 8e1
Data transmission rate
1200, 2400, 4800, 9600, 19200 [bps]
Power supply voltage
9–14 V**
Maximum power consumption
310 mA**
Case protection class
IP65 (external application)
Operating temperature
from −20°C to +55°C
Warranty
2 years
Certificates
CE
Device external dimensions Tx: 152 × 103 × 60 [mm]; Rx: 164 × 164 × 80 [mm]
*The number of usable channels depends on the regulations in the specific country. The
use of 8 channels is permitted in the European Union countries, while in many countries
outside of the Union 16 channels can be used.
**We recommend using high quality power supplies (high-efficiency transformer-based
or impulse ones, with low current rippling), with current efficiency of at least 400 mA