Canmax CM-520 User Manual - page 113
Enter 113 End
*/$%ENTR* *ZEND*
6. Memory / Bluetooth General Setting
6-2-26 Beep Tone
Beep Tone configuration enables to configure the frequency of beep sound.
*C58E0*
Configuration Range
Unit
Default Setting
100 - 5000HZ
100 HZ
2700 HZ
Procedure:
Example:
(A) Scan “Enter” barcode
(B) Scan “Beep Tone” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 3000 Hz, the
parameter value is 3000Hz / 100 Hz
= 30
6-2-27 Beep Time
Beep time configuration enables to configure the duration of the beep sound
.
*C59E0*
Configuration Range
Unit
Default Setting
0.01 Sec ~ 2.55 Sec
0.01 sec
0.1 sec
Procedure:
Example:
(A) Scan “Enter” barcode
(B) Scan “Beep Time” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 0.2 sec, the
parameter value is 0.2 sec / 0.01 sec
= 20
6-2-26 Beep Tone
6-2-27 Beep Time