Canmax CM-520 User Manual - page 69
69
5. Bluetooth Connection Mode Instruction
5-7 Spp-A303PT Mode CONNECTION (USB-COM only)
Make sure the scanner is in Bluetooth mode. Please refer to chapter
4-2-1 for how to configure in Bluetooth mode.
Make sure the Mode selection code is configured as “7”. Please refer
to chapter 4-2-4-7
When Bluetooth Connection established, please check device manager. You
will know which COM port is available, then use Terminal program to receive
scan data.
When connecting scanner and Bluetooth Dongle,
Press and hold the Pairing/delete (small) key until the
blue LED blinking, then push Scan Key into pairing
mode. The scanne will establish the Bluetooth
connection. If connection successful, the Blue LED
indicator will be on. If not, please repeat the above
mention action or check the Bluetooth parameters
setting.
Insert Bluetooth SPP Dongle to PC.
5- 7 Spp-A303PT Mode Connection (USB-COM only)