Canon DADF-M1 Service Manual - page 65
Chapter 3
3-7
3.4.5 No.1 Registration Roller
3.4.5.1 Before Removing the No. 1 Registration Roller
0017-6441
1) Remove the front cover. (page 3-1)Reference[Removing the Front Cov-
er]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3.4.5.2 Removing the No. 1 Registration Roller
0017-6446
1) Remove the harness guide [3].
- 1 screw [1]
- 3 connectors [2]
F-3-35
2) Remove the locking solenoid [3].
- 2 screws [1]
- 1 spring [2]
F-3-36
3) Remove the delivery reversal motor unit [2].
- 2 screws [1]
F-3-37
4) Remove the pre-registration guide [2].
- 2 screws [1]
F-3-38
5) Remove the E-ring [1] and the bushing [2].
F-3-39
6) Remove the E-ring [1], gear [2], and bushing [3].
F-3-40
7) Remove the No. 1 registration roller [1].
F-3-41
3.4.6 No.2 Registration Roller Roll
3.4.6.1 Before Removing the No. 2 Registration Roller
Roll
0017-6486
1) Remove the front cover. (page 3-1)Reference[Removing the Front Cov-
er]
2) Remove the feeder cover. (page 3-2)Reference[Removing the Feeder
[1]
[2]
[2]
[2]
[3]
[2]
[3]
[1]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[3]
[1]