Canon DADF-M1 Service Manual - page 69
of
110
Chapter 3
3-11
F-3-61
8) Open the open/close guide [1]; then, remove the feed guide [4].
- 2 screws [2]
- 1 connector [3]
F-3-62
9) Remove the E-ring [1], gear [2], and bushing [3].
F-3-63
10) Remove the ring [1], gear [2], and busing [3].
F-3-64
11) Release the pressure spring [1].
F-3-65
12) Remove the 2 E-rings [1].
F-3-66
13) Slide the bushing [1] fitted with a plate toward the rear, and detach the
platen guide [2].
[1]
[2]
[3]
[2]
[3]
[4]
[1]
[4]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[1]
[1]