Canon DADF-M1 Service Manual - page 78
of
110
Chapter 3
3-20
F-3-114
If you have replaced the sensor PCB, be sure to perform sensor adjustment.
3.5.7 Delivery Reversal Sensor
3.5.7.1 Removing the Reversal Sensor
0017-6615
1) Remove the segment A, and detach the open/close guide [1] in the direc-
tion of the arrow.
F-3-115
2) Turn over the delivery guide [2].
- 2 screws [1]
F-3-116
3) Remove the delivery reversal sensor [3].
- 2 screws [1]
- 1 connector [2]
F-3-117
If you have replaced the sensor PCB, be sure to perform sensor adjustment.
[1]
[2]
[3]
[1]
[A]
[2]
[1]
[1]
[1]
[2]
[3]