D-Link DES-3250TG User Manual - page 125
D-Link DES-3250TG Standalone Layer 2 Switch
User Name
Type in the new SNMP V3 user name or
community string for V1 or V2. This can be
any alphanumeric name of up to 32
characters that will identify the new SNMP
user.
Group Name
Type in the new SNMP V3 group name.
Again, this can be any alphanumeric name of
up to 32 characters that will identify the
SNMP group the new SNMP user will be
associated with.
SNMP Version
From the pull-down menu select:
V1 – To specifies that SNMP version 1 will
be used.
V2 – To specify that SNMP version 2 will be
used.
V3 – To specify that the SNMP version 3 will
be used.
If Encryption (V3 only) is
checked configure also:
Auth-Protocol
In the Space provided, type an alphanumeric
sting of between 8 and 20 characters that will
be used to authorize the agent to receive
packets for the host.
From the pull-down menu select:
MD5
− To specify that the HMAC-MD5-96
authentication level will be used.
SHA
− To specify that the HMAC-SHA-96
authentication level will be used.
If Encryption (V3 only) is
checked configure also:
Priv-Protocol
In the Space provided, type an alphanumeric
string of between 8 and 16 characters that
will be used to encrypt the contents of
messages the host sends to the agent.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by an
SNMP manager.
115