D-Link DES-3250TG User Manual - Section 2

D-Link DES-3250TG Standalone Layer 2 Switch

Section 2 

Unpacking and Setup 

Unpacking 

Installation 

Power On 

This chapter provides unpacking and setup information for the Switch. 

Unpacking 

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: 

•  One DES-3250TG Standalone Layer 2 Switch  

•  Mounting kit: 2 mounting brackets and screws 

•  Four rubber feet with adhesive backing 

•  One AC power cord 

•  This User’s Guide with Registration Card 

If any item is found missing or damaged, please contact your local D-Link reseller for replacement. 

Installation 

Use the following guidelines when choosing a place to install the Switch: 

•  The surface must support at least 5 kg 

•  The power outlet should be within 1.82 meters (6 feet) of the device 

•  Visually inspect the power cord and see that it is secured to the AC power connector 

•  Make sure that there is proper heat dissipation from and adequate ventilation around the switch. Do not place 

heavy objects on the switch 

Desktop or Shelf Installation 

When installing the Switch on a desktop or shelf, the rubber feet included with the device should first be attached. Attach these 

cushioning feet on the bottom at each corner of the device. Allow adequate space for ventilation between the device and the 

objects around it. 

4