D-Link DES-3250TG User Manual - Port Utilization

D-Link DES-3250TG Standalone Layer 2 Switch

Figure 9- 1 CPU Utilization window 

To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu. To 

view the CPU utilization by port, use the real-time graphic of the Switch and/or switch stack at the top of the web page by 

simply clicking on a port. Click Apply to implement the configured settings. The window will automatically refresh with new 

updated statistics. 

The information is described as follows: 

Parameters                            Description 

Time Interval [1s ] 

Select the desired setting between 1s and 

60s, where "s" stands for seconds. The 

default value is one second. 

Record Number [200] 

Select number of times the Switch will be 

polled between 20 and 200. The default 

value is 200. 

Utilization 

Check whether or not to display Utilization. 

Port Utilization 

The Utilization window shows the percentage of the total available bandwidth being used on the port. 

To view port utilization, click on the Monitoring folder and then the Port Utilization link: 

123