D-Link DES-3250TG User Manual - Igmp

D-Link DES-3250TG Standalone Layer 2 Switch

The user may globally set the maximum amount of time, in minutes, that an Address Resolution Protocol (ARP) entry can 

remain in the Switch’s ARP table, without being accessed, before it is dropped from the table. The value may be set in the 

range of 0-65535 minutes with a default setting of 20 minutes.  To add and  an ARP entry click Add.  The following window 

will appear.  

Figure 7- 11. Static ARP Settings (Add) window 

The following fields can be set or viewed: 

Parameter                         Description 

IP Address 

The IP address of the ARP entry. 

MAC Address 

The MAC address of the ARP entry. 

IGMP 

IGMP Snooping  

From the Configuration menu, select the IGMP folder, and then click IGMP Snooping to open the following window:

Figure 7- 12.  Current IGMP Snooping Group Entries window  

To edit an IGMP Snooping entry on the switch, click the Modify button next to the entry on the Current IGMP Snooping 

Group Entries window.The IGMP Snooping Settings window, shown below, will appear.

43