D-Link DES-3526 - Switch - Stackable User Manual - Ip-Mac Binding Table
xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
101
IP-MAC Binding Table
The window shown below can be used to create IP-MAC binding entries. Click the IP-MAC Binding Table on the IP-MAC
Binding folder on the Configuration menu to view the IP-MAC Binding Setting window. Enter the IP and MAC addresses of
the authorized users in the appropriate fields and click Add. To modify either the IP address or the MAC address of the binding
entry, make the desired changes in the appropriate field and Click Modify. To find an IP-MAC binding entry, enter the IP and
MAC addresses and click Find. To delete an entry click Delete. To clear all the entries from the table click Delete All.
Figure 6- 84. IP-MAC Binding Table window
The following fields can be set or modified:
Parameter Description
IP Address
Enter the IP address you wish to bind to the MAC address set below.
MAC Address
Enter the MAC address you wish to bind to the IP Address set above.
All Ports
Click this check box to configure this IP-MAC binding entry (IP Address + MAC Address) for all
ports on the Switch.
Ports
Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC
Address).