D-Link DES-3526 - Switch - Stackable User Manual - Umb Cast (Rx)

xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual 

137

Parameter                    Description 

Time Interval  

Select the desired setting between 1s and 60s, where "s" stands for seconds. The default 

value is one second. 

Record Number  

Select number of times the Switch will be polled between 20 and 200. The default value is 20. 

Bytes 

Counts the number of bytes received on the port. 

Packets 

Counts the number of packets received on the port. 

Show/Hide 

Check whether to display Bytes and Packets. 

Clear 

Clicking this button clears all statistics counters on this window. 

View Table 

Clicking this button instructs the Switch to display a table rather than a line graph. 

View Line Chart 

Clicking this button instructs the Switch to display a line graph rather than a table. 

UMB Cast (RX) 

Click the UMB Cast (RX) link in the Packets folder of the Monitoring menu to view the following graph of UMB cast packets 

received on the Switch. 

Figure 8- 5. Rx Packets Analysis window (line graph for Unicast, Multicast, and Broadcast Packets) 

To view the UMB Cast Table, click the 

View Table

 link, which will show the following table: