D-Link DES-3526 - Switch - Stackable User Manual - Firmware Upgrade
xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
172
NOTE: Upon this firmware release, some functions of the SIM can only be configured through the
Command Line Interface. See the DES-3526 Command Line Interface Reference Manual for more
information on SIM and its configurations.
Firmware Upgrade
This window is used to upgrade firmware from the Commander Switch to the Member Switch. Member Switches will be listed in
the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and Version. To
specify a certain Switch for firmware download, click its corresponding check box under the Port heading. To update the firm-
ware, enter the Server IP Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to
initiate the file transfer.
Figure 10- 19. Firmware Upgrade window
Configuration File Backup/Restore
This window is used to upgrade configuration files from the Commander Switch to the Member Switch. Member Switches will
be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and
Version. To specify a certain Switch for upgrading configuration files, click its corresponding radio button under the Port heading.
To update the configuration file, enter the Server IP Address where the firmware resides and enter the Path/Filename of the
firmware. Click Download to initiate the file transfer.
Figure 10- 20. Configuration File Backup/Restore window