D-Link DGS-1210-10P Reference Manual - page 19
4 SmartConsole Utility
D-Link Web Smart Switch User Manual
14
received and IP Address denotes where it comes from. Click Refresh to redisplay all log entries, click Clear
to clear all log entries. Click Exit to exit.
Figure 4.3 – SmartConsole Log
Trap
By setting up in “Trap to SmartConsole Utility” in D-Link Web Smart switches, traps can be collected by the
designated host PC with the SmartConsole Utility installed. Click this icon to launch the Trap window. Click
View Trap to show the events of the SmartConsole Utility and the device. Time indicates when the trap
message was received, Location indicates the physical location of the switch that sends out traps, IP
Address denotes where it comes from and Event shows the content of this trap message. Click Refresh to
redisplay all traps, click Clear to clear all entries. Click Exit to exit.
Figure 4.4 – SmartConsole Trap
The trap icon in the SmartConsole Settings will change while receiving new trap messages. Please see
below for detailed description.
Icon
Description
No new traps
New traps was received