D-Link DGS-1210-10P Reference Manual - page 71
5 Configuration
D-Link Web Smart Switch User Manual
66
state of the port transitions from down to up, or when an EAPOL-start frame is received. The Switch then
requests the identity of the client and begins relaying authentication messages between the client and the
authentication server. The default setting is Auto.
ACL > ACL Wizard
Access Control List (ACL) allows you to establish criteria to determine whether or not the Switch will forward
packets based on the information contained in each packet's header. This criteria can be specified on a
basis of the MAC address, or IP address.
The ACL Configuration Wizard will aid with the creation of access profiles and ACL Rules. The ACL Wizard
will create the access rule and profile automatically. The maximum usable profiles are 50 and with 200 Rules
in total for the switch. For DES-1210-52, the maximum usable profiles are 50 and with 450 Rules in total for
the switch.
Figure 5.84 – ACL > ACL Wizard
From: Specify the origin of accessible packets. The possible values are:
Any - Indicates ACL action will take effect on packets from any source.
MAC Address - Indicates ACL action will be on packets from this MAC address.
IPv4 Addresses - Indicates ACL action will be on packets from this IPv4 source address.
IPv6 Address - Indicates ACL action will be on packets from this IPv6 source address.
To: Specify the destination of accessible packets. The possible values are:
Any - Indicates ACL action will be on packets to any destination.
MAC Address - Indicates ACL action will be on packets from this MAC address. The field of format
is xx-xx-xx-xx-xx-xx.
IPv4 Addresses - Indicates ACL action will be on packets from this IPv4 source address.
IPv6 Address - Indicates ACL action will be on packets from this IPv6 source address.
Service Type: Specify the Type of Service to match. The possible values are:
Any - Indicates any service type of packets are examined.
Ether type - Select Ethernet type and IP, ARP or User Define address for filtering packets.
ICMP All - Indicates all ICMP packets are examined.
IGMP - IGMP packets can be filtered by IGMP message type.
TCP All - Indicates all TCP packets are examined.
TCP Source Port - Specify packets from the TCP source port.
TCP Destination Port - Matches the packet to the TCP Destination Port.
UDP All - Indicates all UDP packets are examined.
UDP Source Port - Specify packets from the UDP source port.
UDP Destination Port - Matches the packet to the UDP Destination Port.
Action: Specify the forwarding action for packets matching the ACL rule. Permit forwards packets if all
conditions are met. Deny drops packets if all conditions are met.