D-Link DGS-3308FG - Switch User Manual - Bout
8-port Gigabit Ethernet Switch User’s Guide
1
A
BOUT
T
HIS
G
UIDE
This User’s guide tells you how to install your DGS-3308, how to connect it to your Ethernet network, and how to set its
configuration using either the built-in console interface or Web-based management.
Overview of this User’s Guide
•
Chapter 1, “Introduction.” Describes the Switch and its features.
•
Chapter 2, “Unpacking and Setup.” Helps you get started with the basic installation of the Switch.
•
Chapter 3, “Identifying External Components.” Describes the front panel, rear panel, and LED indicators of the
Switch.
•
Chapter 4, “Connecting the Switch.” Tells how you can connect the Switch to your Ethernet network.
•
Chapter 5, “Switch Management and Operating Concepts.” Talks about Local Console Management via the
RS-232 DCE console port and other aspects about how to manage the Switch.
•
Chapter 6, “Using the Console Interface.” Tells how to use the built-in console interface to change, set, and
monitor Switch performance and security.
•
Chapter 7, “Web-Based Network Management.” Tells how to manage the Switch through an Internet browser.
•
Appendix A, “Technical Specifications.” Lists the technical specifications of the DGS-3308TG and DGS-3308FG.
•
Appendix B, “RJ-45 Pin Specifications.” Shows the details and pin assignments for the RJ-45
receptacle/connector.
•
Appendix C, “Factory Default Settings.”
•
Appendix D, “Understanding and Troubleshooting the Spanning Tree Protocol.”
•
Appendix E, “Brief Review of Bitwise Logical Operations.”