D-Link DGS-3308FG - Switch User Manual - User Accounts Management
8-port Gigabit Ethernet Switch User’s Guide
59
Figure 6-4. Setup User Accounts screen
User Accounts Management
From the Main Menu, highlight Setup User Accounts and press Enter, then the Setup User Accounts menu
appears.
1.
Toggle the Action:< > field to <Add> using the space bar. This will allow the addition of a new user. The other
options are <Delete> - this allows the deletion of a user entry, and <Update> - this allows for changes to be made to an
existing user entry.
2.
Enter the new user name, assign an initial password, and then confirm the new password. Determine whether the new
user should have <Root>, <User+>,or <User> privileges. The space bar toggles between the three options.
3.
Highlight APPLY and press enter to make the user addition effective.
4.
Press Esc. to return to the previous screen or Ctrl+T to go to the root screen.
5.
A listing of all user accounts and access levels is shown below the user setup menu. This list is updated when APPLY
is executed.
6.
Please remember that APPLY makes changes to the switch configuration for the current session only.All changes
(including User additions or updates) must be entered into non-volatile ram using the Save Changes command on
the Main Menu - if you want these changes to be permanent.
Root, User+ and Normal User Privileges
There are three levels of user privileges: Root and User+, and User. Some menu selections available to users with Root
privileges may not be available to those with User+ and User privileges.
The following table summarizes the Root, User+ and User privileges:
Switch Configuration
Privilege
Management
Root User+
User