D-Link DGS-3308FG - Switch User Manual - Dns Relay
8-port Gigabit Ethernet Switch User’s Guide
122
seconds) that the Switch will wait before forwarding a BOOTREQUEST packet. If the value in the seconds field of the
packet is less than the relay time threshold, the packet will be dropped. The range is between 0 and 9999 seconds, with a
default value of 0 seconds.
Highlight BOOTP/DHCP Relay Interface Configuration on the Switch Utilities menu and press Enter.
Figure 6-74. BOOTP/DHCP Relay Interface Configuration screen
The Action:< > field can be toggled between Add/Modifyand Deleteusing the space bar. Toggle to Add/Modify
and enter the subnet name for which BOOTP Relay will be active. The subnet’s network IP address will be displayed in the
IP Addr
field. Enter the IP address of the BOOTP/DHCP server (or servers, as the case may be) in the last field, highlight
APPLY
and press Enter to enter the information into the BOOTP/DHCP Relay table. Use Save Changes from the
Main Menu
to enter the information into NV-RAM.
DNS Relay
To enter the IP addresses of DNS Relay servers, highlight DNS Relay on the Switch Utilities menu and press Enter.