D-Link DGS-3308FG - Switch User Manual - Ip Routing Forwarding
8-port Gigabit Ethernet Switch User’s Guide
108
Figure 6-57. MAC Address Forwarding screen
The Action:< > field can be toggled between Add/Modify and Delete using the space bar. Enter the VLAN ID in the
VID:[ ]
field and the MAC address to be statically entered in the forwarding table in the MAC Address:[ ] field.
Enter the port number in the Port: [ ] field.
Highlight APPLY and press Enter to make the changes current. Use Save Changes from the Main Menu to enter
the changes into NV-RAM.
IP Routing Forwarding
IP routing Switch Operation Mode
With the Switch in Layer 3 Operation mode, entrees into the Switch’s forwarding table can be made using both MAC
addresses and IP addresses. Static IP forwarding is accomplished by the entry of a Static IP Route.
Static Address Resolution Protocol (ARP) entrees can also be made from the Forwarding Menu.
MAC Address Forwarding
To enter a MAC address into the Switch’s forwarding table, highlight Forwarding from the Main Menu and press
Enter
.