D-Link DI-304 User Manual - Applications For Your Di-304
DI-304ISDN Remote Router
4
Telnet Terminal Server
The Telnet User Interface (TUI) is an efficient method of configuring and managing routers.
It utilizes a traditional command-line user interface and is mainly for advanced configuration,
management, and troubleshooting.
Built-in Flash ROM
The Flash ROM memory saves the router firmware and configurations, even after power
down.
Point-to-Point over Ethernet (PPPoE) Client Support
If you are a DSL user, the router has a built-in PPPoE client for establishing
a DSL link connection with the ISP. There is no need to install a further PPPoE driver on
your computers.
Point-to-Point Tunneling Protocol (PPTP) Client Support
Some DSL modems (e.g. Alcatel modems) only provide a PPTP local connection for an
end user computer. The DI-304 has a built-in PPTP client for establishing a DSL link
transport protocol for your entire local network. There is no need to install a PPTP driver
on your computers.
Firewall
In addition to the built-in NAT mechanism, the Router features another powerful firewall to
protect your local network or to deny specified local users access to unauthorized network
services.
Remote Management
The system manager can remotely manage the routers through an ISDN remote dial-in,
ISDN, or DSL WAN interface.
Applications for your DI-304
Some applications for the DI-304 include:
Internet Access
Your DI-304 supports TCP/IP protocol, which is the language used for the Internet. It is
also compatible with access servers manufactured by major vendors such as Cisco and
Ascend.