D-Link DI-304 User Manual - page 24
Manual is about: D-Link ISDN Router User's Guide
of
103
DI-304ISDN Remote Router
16
5. Make the New gateway and Installed gateways fields blank and click OK. A dialog
box will pop up asking you to restart the PC. Click Yes.
Checking TCP/IP Settings
1. After completing the previous steps, click Start
→
Run. Click the Gateway tab and
type winipcfg. The IP Configuration window will open. If the PC does not show an IP
address in the 192.168.0.2 to 192.168.0.254 range, click the Release button to release
the current configuration. Wait a few seconds and click Renew to get a new IP
configuration from the router.