D-Link DI-304 User Manual - page 41
DI-304/DI-304M ISDN Remote Router
33
PPPoE Setup
♦
PPPoE Link – Check Enable to enable the PPPoE client protocol.
ISP Access Setup
♦
ISP Name – Enter the ISP name.
♦
Username – Enter the ISP supplied username.
♦
Password – Enter the ISP supplied password.
♦
Scheduler (1-15) – Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under Advanced
Setup).
ISDN Dial Backup Setup
♦
Dial Backup Mode –There are three options:
? None - Disable the backup function.
? Packet Trigger - The backup line is disconnected until a packet
from a local host triggers the router to establish a connection.
? Always On - If the broadband connection is no longer available, the
backup line will automatically connect and stay Always On until the
broadband connection is recovered.
PPP/MP Setup
♦
PPP Authentication – Select PAP or CHAP for widest compatibility.
♦
Always On - If the broadband connection is no longer available, the backup
line will automatically connect and stay Always On until the broadband
connection is recovered.
♦
Idle Timeout – Idle timeout means the router will disconnect after being idle
for a preset amount of time. The default is 180 seconds. If you set the time to 0,
the PPP session will not terminate itself.