D-Link DSN-1100 User Manual - page 22
Other manuals for DSN-1100:
Quick Start Manual
Manual is about: D-Link xStack Storage iSCSI SAN Arrays
of
137
12
Chapter 2 Getting Started
Figure 2-3. Management Port Page
4. The Management Port page provides fields for entering an IP address, subnet, default
gateway, and host name of the xStack Storage management port. The settings you specify
must be compatible with your local network and accessible to client computers that may
be used to access the xStack Storage Management Center. By default, the host name is
the model number of the array. If desired, you can change this name to one that is more
meaningful.
5. Click Next to continue. The Data Port page appears once for each data port on your
system (see Figure 2-4).