D-Link DSN-1100 User Manual - page 52
42
Chapter 3 Managing Volumes
–
Press the right mouse button and click Grant/Revoke Access from the shortcut
menu.
–
Click the Initiator Access tab.
Any of these steps displays the Initiator Access tab (see Figure 3-21).
Figure 3-21. Initiator Access Tab
3. If the top option is checked, all iSCSI initiators can access the selected volume. To
change this selection, uncheck this optionand select one of the following:
–
Grant access to Initiator. Enter the name of an initiator that will have access
to this volume. To enable CHAP, check Require CHAP Logon Authentication,
enter a CHAP secret (12 to 16 characters) in the CHAP Secret field, and re-
enter the same CHAP secret in the Confirm CHAP Secret field (or you can
enable CHAP later – see section 3.4.4). Click Apply.
–
Grant access to an iSCSI Initiator in this list. Select the iSCSI initiators to
which you want to grant access to this volume and click Apply.