D-Link DSN-1100 User Manual - page 39
xStack Storage Management Center Software User’s Guide
29
Figure 3-2. Example of the Volume View Sorted by Initiator
3.2 Creating Volumes
Adding volumes defines what volumes are accessible through the xStack Storage target.
The xStack Storage Management Center provides a Create Volume Wizard that makes
volume creation as easy as answering a few questions. Options are provided that allow
you to customize and fine-tune the volume or have the Wizard fine-tune the volume for
you. As you create volumes, record the information in Table C-1.
Drives that have volumes cannot be reserved for use as spares. If you intend
to use a drive as a spare, perform the procedure in section 4.2.2 before
creating volumes on the drive.
1. In the Volume View, perform one of the following steps:
–
In the System Actions panel, click Volume Creation Wizard.
–
On the Tools menu, click Volume Creation Wizard.
–
On the toolbar, click the Volume Creation Wizard button:
Any step launches the Create Volume Wizard (see Figure 3-3).
iSCSI Initiator
Volume Associated with
the iSCSI Initiator
Information About the
Selected Volume
Appears Here