D-Link DSN-1100 User Manual - page 65
xStack Storage Management Center Software User’s Guide
55
Figure 3-33. Security Tab
3. Check Require CHAP Logon Authentication.
4. In the CHAP Secret field, enter the case-sensitive password that will be used by the
target to authenticate an initiator. Then re-enter the same password in the
Confirm CHAP Secret field. The CHAP secret must be from 12 to 16 characters
long. For security, each typed character appears as a bullet (●).
5. Click Apply.
3.4.4.2 Changing the CHAP Secret
To change the CHAP secret:
1. In the Volume View, click the volume in the Main Display whose CHAP secret you
want to change.
2. Click the Security tab.
The options in Figure 3-33 appear.
3. Delete the entry in the CHAP Secret field and enter a new case-sensitive password
that will be used by the target to authenticate an initiator. Then repeat this step in
the Confirm CHAP Secret field. The CHAP secret must be from 12 to 16 characters
long. For security, each typed character appears as a bullet (●).
4. Click Apply.
5. Record your settings in Table C-1.