D-MAX DCC-600F Manual - page 16
16
•BRIGHTNESS setting
You can increase the brightness of the darkened video.
If you set the brightness to lower value, the image is darkened. If you set the brightness to higher value, the
image gets bright.
- Select [BRIGHTNESS] option on the [EXPOSURE] menu.
- Use Left or right button to set the bright level.
•AGC (Automatic Gain Control) setting
If the images are too dark, change the maximum [AGC] value to make the images lighter.
- Select [AGC] option on the [EXPOSURE] menu.
- Use left or right button to select a mode.
(OFF / LOW / MIDDLE / HIGH)
•SHUTTER (Shutter Speed) setting
Select the desired shutter speed for camera exposure.
You can change the shutter speed to higher speed to capture fast-moving subjects, though the image
becomes darker.
- Select [SHUTTER] option on the [EXPOSURE] menu.
- Use left or right button to set shutter speed.
(x512 ~x 2 / AUTO / OFF / A.FLK / 1/160 ~ 1/90000)
•SENS-UP setting
If pictures are not clear due to darkness, use for increase the sensitivity of picture.
- Select [SENS-UP] option on the [EXPOSURE] menu.
- Use left or right button to select [AUTO] option and press button.
To setting the SENS-UP function, select the [AUTO] on the [SHUTTER].
Note:
If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP]
setting is not available and [---] mark is displayed.
- Select [SENS-UP LIMIT] option.
- Use left or right button to set the SENS-UP limit (x2 ~,x128)