D-MAX DCC-600F Manual - page 17
17
WB MANUAL SETUP
COLOR TEMP INDOOR
RED -----|-----
BLUE -----|-----
EXIT RET↙
D/N AUTO SETUP
LEVEL MIDDLE
DWELL TIME 10 SEC
EXIT RET↙
③ White Balance
Select the method by which the camera shifts its output colors to compensate for the color of a light source.
- Select [WHITE BALANCE] option on the [CAMERA SETTING] menu.
- Use left or right button to select a mode then press
▶ ATW (Auto-Tracing White Balance): In this mode, the color temperature range for the proper white
balance is approximately 1,700
- 11,000°K. Proper white balance may not be obtained under the following conditions:
When the color temperature is out of the 1,700 - 11,000°K range.
- When the scene contains mostly high color temperature objects, such as a blue sky or sunset.
- When the scene is dim.
▶ AWC→PUSH : If you select the AWC→PUSH mode, you will be able to set up the White Balance
automatically using button.
▶ MANUAL: You can set the white balance options manually.
- COLOR TEMP: Use left or right button to select a function.
INDOOR: The color temperature range for the proper white balance is approximately 3,200°K.
OUTDOOR: The color temperature range for the proper white balance is approximately 5,100°K.
RED: Set the desired red value. (-100~100)
BLUE: Set the desired blue value. (-100~100)
④ DAY / NIGHT
- Select [DAY/NIGHT] option on the [CAMERA SETTING] menu.
- Use left or right button to select mode for day/night function.
▶ AUTO: You will be able to change the Day/ Night mode Automatically.
Note:
If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options except AUTO on the
[EXPOSURE] menu, the AUTO mode of the DAY/NIGHT function is not available and [---] mark is displayed.