D-MAX DCC-600F Manual - page 19
19
PRIVACY SETUP
MASK NUMBER AREA1
DISPLAY OFF
COLOR GRAY
HEIGHT 40 -----|-----
WIDTH 40 -----|-----
MOVE Y 50 -----|-----
MOVE X 50 -----|-----
EXIT RET↙
SPECIAL
D-ZOOM OFF
D-EFFECT OFF
SHARPNESS 34 -----|-----
STABILIZER OFF
COLOR ON
SYNC INT
USER TITLE OFF
LANGUAGE ENG
EXIT RET↙
• If you set the AGC to [OFF] on the [EXPOSURE] menu, the [ D-DNR] function is not available.
• When you use this function, the afterimage may occur.
⑦ Privacy Mask setting
This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed
in the screen. Up to 8 zones can be registered.
- Select [PRIVACY] option on the [CAMERA SETTING] menu.
- Use left or right button to select a [ON] and press setup. The PRIVACY MASK menu appears.
- Use left or right button to select a zone number (AREA1 ~ AREA8) on the [MASK NUMBER] option.
- Use left or right button to set up the ON or OFF on the [DISPLAY] option.
- Use left or right button to select the color of the mask zone box on the [COLOR] option.
- Use left or right to select an option then use left or light button to adjust the option
▶HEIGHT: Enlarge or decrease the vertical size of the mask zone box.
▶WIDTH: Enlarge or decrease the horizontal size of the mask zone box.
▶MOVE Y: Moves vertical position of the mask zone box.
▶MOVE X: Moves horizontal position of the mask zone box.
Notes:
The parts with the registered mask numbers from AREA1 to AREA4 have the same color. (So do the
parts with the numbers from AREA5 to AREA8). If you change the mask color, the registered mask color will
be changed automatically with the same color for each of group (AREA1~4, AREA5~8).
⑧Special menu settings
•D-ZOOM (Digital Zoom) level