D-MAX DCC-600F Manual - page 21
21
RESET
CAMERA REBOOT↙
FACTORY RESET↙
EXIT RET↙
The SYNC function is available only with AC power source.
- Select [SYNC] option on the [SPECIAL] menu.
- Use left or right button to select [INT] or [LL].
▶ INT: Selects for using the internal synchronization.
▶ LL (Line Lock): Selects for the operation of multi cameras because it synchronizes the camera phase by
using the external signal (AC Signal).
A little phase deviation for some sets may be aligned.
•User title setting
You can use the camera identification to assign a number and character to the camera (0 - 9, A-Z, a-z).
To disappear the user title, select [OFF].
- Select [USER TITLE] option on the [SPECIAL] screen.
- Use left or right button to select a [ON] then press . The USER TITLE menu appears.
- Use up, down, or left, right button to select a character or number.
▶ CLR: If you enter the wrong code, select CLR then press .
▶ POS: Use left or right button to move position of USER TITLE on the screen.
▶ END: Confirm your selection.
▶ A(Blank): Insert a space at the cursor position.
▶ : Moves cursor to left or right.
•Language setting
Select a language for setup menu and information display.
⑨Reset settings
- Select [RESET] option.