E-MetroTel UCX50 Quick Start Manual - page 6
www.emetrotel.com
Page 5
copyright © 2011 E-Metrotel Global Inc
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
To prevent unauthorized access to the management interface of your UC system you should change the default management password as the
x
very first step in the initial configuration of the system.
To change the management password of your UC Digital Gateway system, perform the following steps:
x
Open the UC Digital Gateway Web-based Configuration Utility
x
From the
tab, select
System
User Management
From the left side column, select Users
Select the
account. The
page is presented. Press the
button to open the
page.
admin
View User
Edit
Edit User
Enter the new password and then press the
button to save it.
Apply Changes
3.3. Changing the Network Configuration
If your BCM based UC system includes an integrated router, you should
before the configuration of the UC
x
configure the integrated router
x
system.
To use the UC system on your LAN, you may need to change its network configuration to match your network. You should update some or all of
x
the following properties:
IP address and subnet mask
Host name
Default gateway
DNS server(s)
To change the IP address and subnet mask of your UC x system, perform the following steps:
Open the UC Digital Gateway Web-based Configuration Utility
x
From the
tab, select
System
Network
From
, select the public interface of the UC system to open the
page.
Ethernet Interfaces List
x
Edit Interface
If you want the UC system to obtain its IP address dynamically from your DHCP server, select the DHCP option and press the
x
Apply
button.
Changes
If you want the UC system to use a static IP address, select the Static option, specify the IP address and the subnet mask and press the
x
button.
Apply Changes
Confirm that you want to change the network parameters. If you just changed the IP address of the system while using the public
interface to access the Web-based Configuration Utility, you must reopen it using the new IP address.