Eacome G2S Series User Manual - page 10
Manual is about: Conference Phone System
of
10
16
1. Plug the optional extension microphones into the EXT1 and EXT2 jacks of the
conference phone G2S series. See (4)&(5) on the connection diagram.
2. Plug the AC adaptor power into the AC jack.
3. To pick up well please speak facing the microphone. The inner microphone
position is shown as in the figure below .
4. There are MUTE button and status LEDs on the extension microphones.
NOTE:
You should plug and pull the cable to extension microphone’s 4P4C jacks while
power supply is disconnected to ensure microphone work well.
#
green LEDs indicate that microphone is on work.
#
Red LEDs indicate that microphone is muted.
Mute button and status LED
Extension microphone
INSTALLINg EXTENSION MICROPHONES