Eacome G2S Series User Manual - page 3
2
3
PARTS LIST
Adaptor/Interface Module
Adaptor/Interface Module
Documents
Documents
6.5m Length 8 Strand Cable
6.5m Length 8 Strand Cable
RJ 11 Cable
(Telephone Line Cable)
USB Cable
Parts List(g2S-P)
Parts List(g2S-U)
g2S Series Conference Phone
AC Power Cord
AC Power Cable
Extension microphone (up to 2)
OPTIONAL ACCESSORIES
If any items are missing or damaged, contact your place of purchase immediately.
4P4C-Stream Cable X2
For best performance of your conference phone, avoid the following locations
when selecting an installation location:
•
Areas with high background noise. The microphones might pick up these sounds
and prevent the speakerphone from going into receiving mode when you finish
talking.
•
Surfaces affected by vibration.
•
Recessed areas such as in a corner, under a cupboard, or next to a cabinet. These
locations may cause an echo effect.
•
Don’t put any objects within 60cm from your phone.
INSTALLINg AND SELF-DETECTINg
CAUTION:
To reduce risk of personal injury, fire, or damaged, use only the power adaptor
supplied with this product.
1. Connect the 8-Stream cable into the EXT jack of the AC adaptor/interface module
and the POWER jack on the port bay of the G2S.
See(1) on the connection diagram.
2. Connect the telephone line cable into the LINE jack on the AC adaptor/ interface
module and a telephone wall jack.
See(2) on the connection diagram.(Available for G2S-P)
3. Connect the USB port of G2S to a PC through the USB cable.This function is
available for G2S-U model.
4. Connect the AC adaptor/interface power cord into a standard AC power outlet.
See(3) on the connection diagram.
5. Connect the optional extension microphones into the EXT1 and EXT2 jacks of
the G2S . This function is available for G2S-E model.When installing 2 extension
microphones, using 4P4C cable to connect the phone and the 4P plug of the
extension
microphones.
See(4) on the connection diagram.
INSTALLINg
#
Never use damaged products!