Eacome G2S Series User Manual - page 4
4
5
5. Extension Microphone (optional)
6. Extension Microphone (optional) Cable.
7. USB Cable(for U model)
INSTALLINg DIAgRAMS AND INTERFACE SPECIFICATION
Connection Diagram
2
1
4
6
3
AC power outlet
1. 6.5m length 8-Strand Cable
2. Telephone Line Cable(For P mode)
3. Power Cord
4. Extension Microphone 1 (Optional)
#
Feature annotation is the sum of various models, not just the corresponding to a
specific model of products
NOTE:
•
The G2S is properly installed for PSTN (land line) use if you press and hear a dial
tone,the display will show “PSTN Dialing”. Otherwise, recheck all the installation
steps.
•
In the event of a power outage, the G2S will not be able to make and receive calls.
SELF-DETECTINg:
When the conference phone has access to electricity, the self-detecting program will
be activated.
•Thegreen,redandblueindicatorLEDswillflashsequentially
•TheLCDwillshow“EACOME“
•Theself-detectionwillbefinishedaftertestingmusic.
Interface Specification
POWER: Power jack on the port bay of the G2S.
LINE: Telephone line jack on the AC adaptor/Interface module.
EXT1: EXT1 jack of extension microphone.
EXT2: EXT2 jack of extension microphone.
EXT: EXT jack on the AC adaptor/ Interface module.
USB: USB port, connect to PC.
7