Eacome G2S Series User Manual - page 8
12
13
Erasing Record (in the state of standby mode)
Press the “MUTE” key for 5 seconds in stand-by
to delete all call history.
Rapid-dial
In on-hook state (See illustration below).
1. Push rapid-dial “MEMO” button (Available for G2S-P models) and indicator LEDs
turn green.
2. Dial two rapid-dial slot identification number and blue LEDs will keep on if dialled
correctly.
Dial rapid-dial number illustration.
Please note:
1. Each of the two rapid-dial slot identification number should be within 0-9 and
the identification number should be within 0-20.
2. All the rapid-dial operations should be used in the on-hook state.
3. Any illegal operation during the process will turn on red LEDs.
4. Illegal operation is rapid-dial slot identification number is greater than 20, or
rapid-dial slot is non-exist or no number is stored in the rapid-dial slot.
(Two rapid-dial slot
identification numbers)
MEMO
?
?
PHONE SETTINg
The G2S feature settings can be accessed manually using the keypad and menu keys.
Use the
, keys and button to navigate through various Menu Settings.
MENU
SET DATE
SET FLASH
LCD BRIGHT
SPEEDIAL
MENU
SET DATE
SET FLASH
SET BRIGHT
SPEEDIAL
RECORDING
PLAYBACK
Using the menu
1 SET DATE
2 SET FLASH
3 LCD BRIGHT
4 SPEEDIAL