Easy At Home EBP-017 User Manual - page 5
Setting Date, Time and Measurement Unit
Please proceed to time setting before your initial use so as to
ensure each piece of record are labled with a time stamp. (Year
Range: 2010-2050)
1.When the monitor is OFF, press
the SET button to enter into the
clock mode, then press and hold
“SET” button for about 3 seconds
to enter year setting.
2.Press “MEM” button to change
the numeral. Each press will
increase the numeral by one in a
cycling manner.
3.Press “SET” button to confirm the
[YEAR]. Then the monitor diverts
to [MONTH] and [DAY] setting.
7
6
BEFORE YOU START
4.Repeat steps 2 and 3 to set
the [MONTH] and [DAY]. Then
it will enter into time format
setting.
5.Select the 24 hours
time format or the 12
hours time format.
Repeat steps 2 and 3
to set the [HOUR]
and [MINUTE].
6.Repeat steps 2 and
3 to set the
measurement unit.
7.After confirming the meausrement unit, the LCD will display all the
settings you have done one by one and the monitor will shut off.
BEFORE YOU START