Easy At Home EBP-017 User Manual - page 6
Tie the Cuff
1
.Remove all accessories (watch, bracelet, etc) from your left wrist. If your
physician has diagnosed you with poor circulation in your left wrist, use your
right wrist.
2.Roll or push up your sleeve to expose the skin.
3.Apply the cuff to your left wrist with your palm facing up.
4
.
Position the edge of the cuff about 1-1.5cm
(0.4 -0.6 ) from wrist joints.
5
.
Fasten the wrist cuff around your wrist, leaving no extra room between the cuff
and your skin. If the cuff is too loose, the measurement will be inaccurate.
Rest for 5 minutes before measuring.
Wait at least 3 minutes between measurements. This allows your blood
circulation to recover.
For a meaningful comparison, try to measure under similar conditions. For
example, take daily measurement at approximately the same time, on the same
wrist, or as directed by a physician.
9
8
MEASUREMENT
Start Measurement
1.After correctly positioning the cuff,
press START/STOP button to turn
on the monitor, and it will complete
the measurement process.
Adjust to zero.
Inflating and measuring.
Display and save the
measuring result.
2.Press START/STOP button to turn
off the monitor. Otherwise, the
monitor will shut off within 1
minute.
MEASUREMENT
LCD Display.
Norm
Op
tim
Time
Da
te
Keep the BP monitor the same level of your heart