Blood pressure monitor ebp-095 version:1.0 to use the monitor correctly and safely, please read the manual thoroughly. Please keep this manual in order to reference in future. Arm type thank you very much for selecting blood pressure monitor ebp-095. Easy at home medical,llc any questions,please cal...
1 catalogue catalogue introduction...................................................................................................................2 general description safety information lcd display signal monitor components before you start...........................................................
2 3 introduction introduction thank you for selecting arm type blood pressure monitor (ebp-095). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable service. Readings taken by the ebp-095 are equivalent to...
Start stop 4 5 introduction introduction lcd display signal symbol description systolic blood pressure high pressure result diastolic blood pressure low pressure result explanation pulse pulse/minute deflating cuff air is exhausting of deflating current time time(year:month:day:hour:minute) memory i...
7 6 before you start before you start the choice of power supply in order to get the best effect and protect your monitor,please use the right battery and special power adaptor. 1. Slide off the battery cover. 2. Install the batteries by matching the correct polarity, as shown. 3. Replace the cover....
9 8 before you start measurement rest for 5 minutes before measuring. Wait at least 3 minutes between measurements. This allows your blood circulation to recover. For a meaningful comparison, try to measure under similar conditions. For example, take daily measurements at approximately the same time...
11 10 measurement 1.After selecting the user, press the “start/stop” to start measurement, and it will finish the whole measurement for the selected user. Take user 1 for example. Adjust the zero . Lcd display inflating and measuring. Display and save the results. The corresponding backlight shows a...
13 12 the most recent record (1) is shown first. Each new measurement is assigned to the first (1) record. All other records are pushed back one digit (e.G., 2 becomes 3, and so on), and the last record (60) is dropped from the list. Caution data management 1.Hold “mem” for 3 seconds when the monito...
15 14 tips for measurement wait at least 1 hour after dinner or drinking wait at least 20 minutes after taking a bath in a very cold environment immediate measurement after tea, coffee, smoking when talking or moving your fingers when you want to discharge urine measurements may be inaccurate if tak...
17 16 about blood pressure what are systolic pressure and diastolic pressure? Press artery vein blood discharging systolic relax blood entering diastolic when ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pres...
19 18 troubleshooting this section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it should, check here before arranging for servicing. Problem symptom check this remedy no p...
21 20 authorized components authorized components 1. Please use the authorized adapter. (not included) contact information adapter input： 100-240vac 50/60hz 0.3a max output： 6v 1000ma ( conforms to ul certificate ) for more information about our products, please visit , or call customer 1-866-822-69...
23 22 emc guidance table 1 guidance and manufacturer’s declaration – electromagnetic emissions- for all me equipment and me systems guidance and manufacturer’s declaration – electromagnetic emissions rf emissions cispr 11 group 1 class b not applicable not applicable compliance the device is intende...
24 table 4 guidance and manufacturer’s declaration – electromagnetic immunity – for me equipment and me systems that are not life-supporting guidance and manufacturer’s declaration – electromagnetic immunity immunity test 3 vrms 3 v/m compliance level iec 60601 test level conducted rf iec 61000-4-6 ...
